Bobcat Wheeled loaders

Brake fluid capacity & service interval

Bobcat wheeled loaders require 0,25 liter of brake fluid. Service intervals include checks at 400 hours and 500 hours, with a change interval of 12 months or 3000 hours. The data covers 3 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
AL275 (2005-2010)
  • Use: Normal
  • Capacity 0,25 liter
  • Check 400 hours
  • Change 12 months/ 3000 hours
AL350 (2005-2010)
  • Use: Normal
  • Capacity 0,25 liter
  • Check 500 hours
  • Change 12 months/ 3000 hours
AL440 (2005-2010)
  • Use: Normal
  • Capacity 0,25 liter
  • Check 500 hours
  • Change 12 months/ 3000 hours

Additional Notes

  • All three wheeled loader models covered in the 2005-2010 range share a brake fluid capacity of 0.25 liter, which is a small reservoir volume consistent with a hydraulic brake system rather than a large-scale hydraulic circuit.
  • The Bobcat AL275 wheeled loader carries a check interval of 400 hours under normal use conditions, which is shorter than the 500-hour check interval specified for the AL350 and AL440.
  • Despite the difference in check intervals, the AL275, AL350, and AL440 all share the same change interval of 12 months or 3,000 hours under normal use conditions, whichever comes first.
  • The dual-format change interval of 12 months or 3,000 hours means a calendar-based threshold applies alongside an operational one, so a machine with low annual hours would still require a fluid change within the year.
  • All three models are specified with a hydraulic brake system, which explains the relatively modest 0.25-liter capacity, as hydraulic brake reservoirs are typically small compared to the main hydraulic system.

Other Systems