Toyota Sequoia, XK80 (USA / CAN)

Transfer case fluid capacity & service interval

Toyota Sequoia, XK80 (USA / CAN) requires transfer case fluid with a capacity of 2,05 liters. Service intervals occur every 30000 miles or 36 months. The data covers 1 configuration.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Sequoia 3.4 AWD (2022- )
  • Use: Normal
  • Capacity 2,05 liter
  • Check 30000 miles/ 36 months

Additional Notes

  • The Toyota Sequoia 3.4 AWD transfer case holds 2.05 liters of fluid, a figure that reflects a service fill capacity rather than a full overhaul or dry fill, meaning the unit retains residual fluid during a drain-and-refill procedure.
  • The 30,000-mile or 36-month interval listed for the 2022 Sequoia 3.4 AWD transfer case is a check interval under normal use conditions, meaning the fluid level and condition are inspected rather than automatically replaced on that schedule.
  • The normal use condition tied to the 30,000-mile/36-month check interval distinguishes routine on-road driving from more demanding operating environments, which would typically carry a shorter inspection or service cycle.

Other Systems