Peugeot 2008 II

Manual transmission fluid capacity & service interval

Peugeot 2008 II manual transmission fluid has a capacity range of 1,7 to 1,8 liters. Service intervals include normal use and filled for life. The data covers 4 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
2008 II 1.2 PureTech 100, HNK (2019- )
  • Use: Normal
  • Capacity 1,7-1,8 liter
  • Code: MB6 6/1
2008 II 1.2 PureTech 130, HNL, HNS (2019- )
  • Use: Normal
  • Capacity 1,7-1,8 liter
  • Code: MB6 6/1
2008 II 1.5 BlueHDi 100, YHY (2019- )
  • Use: Filled for life
  • Capacity 1,7-1,8 liter
  • Code: MB6 6/1
2008 II 1.5 BlueHDi 110, YHS (2019- )
  • Use: Filled for life
  • Capacity 1,8 liter (Dry fill)
  • Capacity 1,7 liter (Service fill)
  • Code: MB6 6/1

Additional Notes

  • The Peugeot 2008 II manual transmission fluid specifications cover transaxle units across both petrol and diesel engine variants starting from 2019.
  • The 1.2 PureTech 100 (HNK) and 1.2 PureTech 130 (HNL, HNS) petrol variants share an identical capacity range of 1.7-1.8 liters, applied under normal use conditions.
  • The 1.5 BlueHDi 100 (YHY) carries a capacity range of 1.7-1.8 liters under a filled-for-life designation, meaning no scheduled fluid replacement interval is specified for the transaxle.
  • The 1.5 BlueHDi 110 (YHS) is the only variant in the dataset that distinguishes between a dry fill capacity of 1.8 liters and a service fill capacity of 1.7 liters, a difference of 0.1 liters between the two fill types.
  • A dry fill figure represents the total fluid volume required when filling a completely empty or newly assembled transmission, while a service fill figure reflects the lower volume needed after a partial drain during routine maintenance.
  • The 0.1-liter gap between dry and service fill on the 1.5 BlueHDi 110 indicates that residual fluid remains in the transaxle after a standard drain procedure, which is typical for units without a full sump drain design.
  • Both 1.5 BlueHDi variants share the filled-for-life use condition, whereas both 1.2 PureTech variants are serviced under normal use intervals, representing a clear split between the diesel and petrol transaxle service philosophies in the 2008 II lineup.

Other Systems