Peugeot 2008 II

Automatic transmission fluid capacity & service interval

Peugeot 2008 II automatic transmission fluid capacity ranges from 2,5 to 7 liters. Service intervals are not listed. The data covers 4 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
2008 II 1.2 PureTech 130, HNL, HNS (2019- )
  • Use: Normal
  • Capacity 7 liter (Dry fill)
  • Capacity 3-4 liter (Service fill)
  • Code: AT6 III 6/1
2008 II 1.2 PureTech 130, HNL, HNS (2019- )
  • Use: Normal
  • Capacity 6 liter (Dry fill)
  • Capacity 2,5-3,5 liter (Service fill)
  • Code: ATN8 8/1
2008 II 1.2 PureTech 155, HNN (2019- )
  • Use: Normal
  • Capacity 6 liter (Dry fill)
  • Capacity 2,5-3,5 liter (Service fill)
  • Code: ATN8 8/1
2008 II 1.5 BlueHDi 130, YHZ (2019- )
  • Use: Normal
  • Capacity 6 liter (Dry fill)
  • Capacity 2,5-3,5 liter (Service fill)
  • Code: ATN8 8/1

Additional Notes

  • The Peugeot 2008 II 1.2 PureTech 130 with engine codes HNL and HNS carries two separate automatic transaxle entries, one listing a 7-liter dry fill with a 3-4 liter service fill, and another listing a 6-liter dry fill with a 2.5-3.5 liter service fill, indicating two distinct transmission variants are fitted to the same engine configuration.
  • A dry fill capacity represents the total fluid volume required when a transmission is completely empty, such as after a full overhaul or replacement, while a service fill reflects the smaller volume needed when fluid is changed during routine maintenance with residual fluid remaining in the torque converter and passages.
  • The 7-liter dry fill on one of the 1.2 PureTech 130 transaxle variants is the highest dry fill value across all listed configurations, pointing to a physically larger or more complex transmission unit compared to the others.
  • The 1.2 PureTech 155 with engine code HNN shares the same 6-liter dry fill and 2.5-3.5 liter service fill specification as the second 1.2 PureTech 130 entry and the 1.5 BlueHDi 130, suggesting a common transmission platform is used across both petrol and diesel variants in the 2008 II lineup from 2019 onward.
  • The 1.5 BlueHDi 130 with engine code YHZ uses the same 6-liter dry fill and 2.5-3.5 liter service fill figures as the petrol counterparts sharing that specification, meaning the automatic transaxle fluid capacity does not differ between the diesel and the smaller-displacement petrol engines in the configurations listed.
  • All four rows carry a normal use condition, meaning the capacities listed apply to standard operating environments rather than severe-duty cycles such as frequent towing, extreme temperatures, or stop-and-go urban driving.
  • The service fill range of 2.5-3.5 liters on the 6-liter dry fill variants reflects a variable quantity, as the exact amount of fluid drained during a service depends on factors such as whether the torque converter is drained and how long the fluid is allowed to evacuate before refilling.

Other Systems