Peugeot 106
Brake fluid capacity & service interval
Peugeot 106 uses brake fluid with a capacity of 0,4 liter. Service intervals include checking at 15000 km, 30000 km, or 24 months, and changing at 60000 km or 24 months. The data covers 5 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| 106 1.0 (1999-2004) |
|
| 106 1.1 (1999-2004) |
|
| 106 1.4 (1999-2004) |
|
| 106 1.5 D (1999-2004) |
|
| 106 GTI 1.6 16V (1999-2004) |
|
Additional Notes
- Across all five configurations of the Peugeot 106 covered here, the hydraulic brake system capacity is uniformly 0.4 liter, a figure consistent with the compact reservoir volumes typical of small hatchback brake systems.
- The 0.4 liter figure represents the service fill capacity for the hydraulic brake system, meaning the volume required to maintain or restore the reservoir to its operating level rather than a full system overhaul quantity.
- The 1.0, 1.1, 1.4, and GTI 1.6 16V variants all share an identical check interval of 30000 km or 24 months under normal use conditions, whichever comes first.
- The 106 1.5 D stands apart from the petrol variants in having a check interval of 15000 km or 24 months under normal use conditions, half the distance-based threshold applied to the other engines.
- Despite the difference in check intervals between the diesel and petrol configurations, the change interval is consistent across all five variants at 60000 km or 24 months under normal use conditions.
- The 24-month time limit on the change interval applies regardless of mileage accumulation, reflecting the hygroscopic nature of brake fluid, which absorbs moisture over time and degrades independently of vehicle use.
- The GTI 1.6 16V, despite being a higher-performance variant, carries the same 0.4 liter capacity and 30000 km check interval as the base 1.0 configuration, with no differentiation in brake fluid service specifications.