Peugeot 106

Automatic transmission fluid capacity & service interval

Peugeot 106 uses automatic transmission fluid with a capacity range of 2,4 to 4,5 liters. Service intervals include checks every 12, 24 months, or 15000 to 30000 km, and fluid changes at 30000 km. The data covers 4 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
106 1.4 (1999-2004)
  • Use: Normal
  • Capacity 2,4 liter
  • Check 24 months/ 30000 km
  • Code: MB3 3/1
106 1.4 (1996-1998)
  • Use: Normal
  • Capacity 4,5 liter (Dry fill)
  • Capacity 2,5 liter (Service fill)
  • Check 24 months/ 30000 km
  • Code: MB3 3/1
106 1.6 (1995-1998)
  • Use: Normal
  • Capacity 4,5 liter (Dry fill)
  • Capacity 2,5 liter (Service fill)
  • Check 15000 km/ 12 months
  • Change 30000 km
  • Code: MB3 3/1
106 1.6 (1994-1995)
  • Use: Normal
  • Capacity 4,5 liter (Dry fill)
  • Capacity 2,5 liter (Service fill)
  • Check 15000 km
  • Change 30000 km
  • Code: MB3 3/1

Additional Notes

  • The Peugeot 106 automatic transmission is a transaxle unit across all listed configurations, meaning the transmission and differential share a common fluid reservoir rather than operating as separate systems.
  • The 106 1.4 (1996-1998) and both 1.6 configurations carry a dry fill capacity of 4.5 liters, which represents the total fluid volume required when filling a completely drained or rebuilt unit with no residual fluid present.
  • A service fill capacity of 2.5 liters applies to the 106 1.4 (1996-1998) and the 1.6 (1994-1998), reflecting the smaller volume needed during a routine fluid exchange where a portion of fluid remains in the torque converter and passages.
  • The 106 1.4 (1999-2004) lists a single capacity figure of 2.4 liters with no dry fill value specified, suggesting the listed figure corresponds to a service-level exchange rather than a full overhaul fill.
  • The 106 1.4 in both the 1996-1998 and 1999-2004 configurations follows a check interval of 24 months or 30,000 km under normal use conditions, with no separate fluid change interval listed.
  • The 1.6 (1994-1995) specifies a check interval of 15,000 km and a change interval of 30,000 km under normal use, making the change interval exactly double the check interval for that configuration.
  • The 1.6 (1995-1998) adds a 12-month time component to the 15,000 km check interval, meaning fluid condition is assessed at whichever threshold arrives first, whether by distance or calendar time.
  • A fluid change interval of 30,000 km is present in both 1.6 configurations (1994-1998) but absent from the 1.4 specifications, where only a check interval is defined under normal use conditions.

Other Systems