Hyundai i10, IA (EU)

Automatic transmission fluid capacity & service interval

Hyundai i10, IA (EU) automatic transmission fluid capacity ranges from 5,7 to 6,1 liters. Service intervals include checks at 48 months or 60000 km and fluid changes at 100000 km. The data covers 12 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
i10 1.0 MPi (2018-2020)
  • Use: Normal
  • Capacity 5,7 liter
  • Check 48 months/ 60000 km
  • Code: A4CF0 4/1
i10 1.0 MPi (2018-2020)
  • Use: Severe
  • Capacity 5,7 liter
  • Check 60000 km/ 48 months
  • Change 100000 km
  • Code: A4CF0 4/1
i10 1.2 MPi (2018-2020)
  • Use: Normal
  • Capacity 6,1 liter
  • Check 48 months/ 60000 km
  • Code: A4CF0 4/1
i10 1.2 MPi (2018-2020)
  • Use: Severe
  • Capacity 6,1 liter
  • Check 60000 km/ 48 months
  • Change 100000 km
  • Code: A4CF0 4/1
i10 1.25 MPi (2018-2020)
  • Use: Normal
  • Capacity 6,1 liter
  • Check 48 months/ 60000 km
  • Code: A4CF0 4/1
i10 1.25 MPi (2018-2020)
  • Use: Severe
  • Capacity 6,1 liter
  • Check 60000 km/ 48 months
  • Change 100000 km
  • Code: A4CF0 4/1
i10 1.0 MPi (2014-2018)
  • Use: Normal
  • Capacity 5,7 liter
  • Check 48 months/ 60000 km
  • Code: A4CF0 4/1
i10 1.0 MPi (2014-2018)
  • Use: Severe
  • Capacity 5,7 liter
  • Check 60000 km/ 48 months
  • Change 100000 km
  • Code: A4CF0 4/1
i10 1.2 MPi (2014-2018)
  • Use: Normal
  • Capacity 6,1 liter
  • Check 48 months/ 60000 km
  • Code: A4CF0 4/1
i10 1.2 MPi (2014-2018)
  • Use: Severe
  • Capacity 6,1 liter
  • Check 60000 km/ 48 months
  • Change 100000 km
  • Code: A4CF0 4/1
i10 1.25 MPi (2014-2018)
  • Use: Normal
  • Capacity 6,1 liter
  • Check 48 months/ 60000 km
  • Code: A4CF0 4/1
i10 1.25 MPi (2014-2018)
  • Use: Severe
  • Capacity 6,1 liter
  • Check 60000 km/ 48 months
  • Change 100000 km
  • Code: A4CF0 4/1

Additional Notes

  • The Hyundai i10 IA (EU) automatic transaxle fluid capacity differs by engine displacement. The 1.0 MPi engine is paired with a transaxle holding 5.7 liters, while the 1.2 MPi and 1.25 MPi engines share a higher capacity of 6.1 liters. The difference of 0.4 liters reflects the larger fluid volume required by the transaxle units matched to the bigger-displacement engines.
  • A transaxle combines the transmission and drive axle into a single integrated unit, which is common in front-wheel-drive vehicles. The capacities listed represent the total fluid volume for the entire transaxle assembly, not a partial service fill.
  • Under normal use conditions, all engine variants across the 2014-2020 range share the same check interval structure: 48 months or 60,000 km, whichever comes first. No fluid change interval is specified under normal use, meaning the check interval alone governs scheduled attention to the fluid under those conditions.
  • Under severe use conditions, the check interval is expressed as 60,000 km or 48 months, and a fluid change at 100,000 km is additionally required. The ordering of distance before time in the severe condition wording, compared to time before distance under normal conditions, reflects a priority on mileage accumulation as the primary trigger in more demanding operating environments.
  • The 100,000 km fluid change interval under severe use applies uniformly to all three engine variants — 1.0 MPi, 1.2 MPi, and 1.25 MPi — across both the 2014-2018 and 2018-2020 model year ranges.
  • Severe use classifications in automatic transmission service typically account for operating conditions such as frequent towing, stop-and-go traffic, extreme temperatures, or mountainous terrain. Under such conditions, fluid degrades more rapidly, which is why a mandatory change at 100,000 km is added on top of the standard check interval.
  • The specifications are consistent between the 2014-2018 and 2018-2020 model year groups for each respective engine variant. Both the fluid capacities and the service intervals remain unchanged across the two production periods for all three engine displacements.

Other Systems