Fiat Panda, 312, 319 (EU)
Transfer case fluid capacity & service interval
Fiat Panda, 312, 319 (EU) transfer case fluid capacity is 0,4 liter. Service intervals are 60000 km or 36 months. The data covers 4 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
|
|
|
|
|
|
|
|
Additional Notes
- The Fiat Panda 312/319 (EU) transfer case, referred to in the specifications as a transferbox (PTU), carries a fluid capacity of 0.4 liter across all four listed 4x4 configurations.
- A 0.4-liter capacity is characteristic of a compact power transfer unit, which is a sealed or semi-sealed assembly rather than a large conventional transfer case, reflecting the Panda's small-vehicle architecture.
- The 1.3 MultiJet 4x4 variants spanning 2012-2018 share an identical service interval: a fluid check at 60,000 km or 36 months, whichever comes first, under normal use conditions.
- The interval is expressed as a check rather than a drain-and-fill replacement, meaning the specification calls for verifying fluid level and condition at that mileage or time threshold rather than a mandatory full fluid exchange.
- Two distinct power outputs of the 1.3 MultiJet engine appear in the 4x4 lineup for the Euro 5 generation: 55 kW (2012-2016) and 59 kW (2014-2016), both sharing the same 0.4-liter PTU capacity and 60,000 km/36-month check interval.
- The Euro 6 generation introduced two further 1.3 MultiJet 4x4 variants, rated at 59 kW (2015-2016) and 70 kW (2015-2018), and both retain the same 0.4-liter capacity and check interval as the Euro 5 configurations.
- The consistency of the 0.4-liter PTU capacity across all power outputs and emission standards from 2012-2018 indicates the same transfer unit assembly was carried through multiple engine and regulatory revisions without a change in fluid volume.