Fiat Panda, 169 (EU)
Differential fluid capacity & service interval
Fiat Panda, 169 (EU) differential fluid capacity ranges from 0,6 to 0,9 liters. Service intervals require a check at 80000 km. The data covers 5 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
|
|
|
|
|
|
|
|
|
|
Additional Notes
- All five 4x4 configurations in the Fiat Panda 169 (EU) lineup carry a rear differential fluid check interval of 80,000 km under normal use conditions.
- The Panda 1.2 (44 kW) 4x4 from 2004-2010 is the only configuration with a capacity range of 0.6-0.9 liter, indicating a wider service fill tolerance compared to the fixed 0.9 liter figure seen across the remaining variants.
- A capacity range rather than a fixed value typically reflects acceptable variation during a service fill, where the lower figure represents a minimum acceptable level and the upper figure represents a full fill.
- The 2010-2012 Panda 1.2 (51 kW) 4x4 specifies a fixed rear differential capacity of 0.9 liter, which aligns with the upper boundary of the earlier 44 kW variant despite the power output difference between the two engines.
- Both the 1.3 Multijet (51 kW) 4x4 and the 1.3 Multijet (51 kW) 4x4 DPF from 2004-2010 share identical rear differential specifications of 0.9 liter capacity and an 80,000 km check interval, meaning the presence of a diesel particulate filter does not alter the differential service data.
- The 1.3 Multijet (55 kW) 4x4 from 2010-2012 retains the same 0.9 liter capacity and 80,000 km check interval as the lower-output 51 kW diesel variants, showing no change in rear differential specification despite the increased power output.