Fiat Panda, 312, 319 (EU)
Brake fluid capacity & service interval
Fiat Panda, 312, 319 (EU) models require 0,55 liter of brake fluid. Service intervals include 24 months or 60000 km/ 24 months. The data covers 5 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Panda 1.3 MultiJet (70 kW) Euro 6 (2015-2018) |
|
| Panda 0.9 TwinAir (44 kW) (2014-2018) |
|
| Panda 0.9 TwinAir (48 kW) (2012-2016) |
|
| Panda 1.2 8V LPG (2012-2020) |
|
| Panda 1.2 8V (2011-2020) |
|
Additional Notes
- Across the Fiat Panda 312/319 (EU) lineup, the hydraulic brake system holds a uniform capacity of 0.55 liter in all listed configurations, from the 0.9 TwinAir variants to the 1.2 8V and 1.3 MultiJet.
- A 0.55-liter figure for a brake fluid system represents a service fill volume, meaning the quantity needed to replenish or replace fluid within the existing hydraulic circuit rather than a full overhaul of the system.
- The 0.9 TwinAir rated at 44 kW, covering 2014-2018, shares an identical 0.55-liter capacity and a 24-month change interval with the 48 kW variant spanning 2012-2016, despite the difference in power output between the two engines.
- The 1.2 8V, available from 2011-2020, and the 1.2 8V LPG variant, available from 2012-2020, both carry the same 0.55-liter capacity and a 24-month change interval under normal use conditions.
- The 1.3 MultiJet (70 kW) Euro 6, covering 2015-2018, is the only configuration in the listed data that pairs the 24-month interval with an additional distance-based threshold of 60,000 km, whichever comes first.
- The distance-based interval of 60,000 km on the 1.3 MultiJet (70 kW) Euro 6 applies under normal use conditions, meaning the interval is not associated with severe or first-change-only service classifications.
- All listed configurations specify normal use conditions, meaning none of the 0.55-liter capacity or interval values are tied to severe-duty operating scenarios.