DS DS 7 Crossback, J

Brake fluid capacity & service interval

DS 7 Crossback, J models require brake fluid maintained between min and max capacity levels. Service intervals include normal use. The data covers 3 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
DS 7 Crossback E-TENSE 4x4 300, 5GB (2019-2022)
  • Use: Normal
  • Between min and max.
DS 7 Crossback 1.5 BlueHDi 130, YHZ (2017-2022)
  • Use: Normal
  • Between min and max.
DS 7 Crossback 2.0 BlueHDi 180, EHZ (2017-2022)
  • Use: Normal
  • Between min and max.

Additional Notes

  • Across all three DS 7 Crossback configurations covering model years 2017-2022, brake fluid capacity is expressed as a fill level rather than a fixed volume, with the specification calling for fluid to sit between the reservoir's minimum and maximum marks.
  • The DS 7 Crossback 1.5 BlueHDi 130 with engine code YHZ is noted as serving a combined hydraulic brake and clutch system, meaning a single shared reservoir supplies both functions simultaneously.
  • The 2.0 BlueHDi 180 with engine code EHZ and the E-TENSE 4x4 300 with drivetrain code 5GB each reference a hydraulic brake system only, without a shared clutch circuit noted in their respective specifications.
  • All three configurations carry a normal use condition designation, which ties the fill-between-marks specification to standard operating circumstances rather than a severe or first-change-only service scenario.
  • The E-TENSE 4x4 300 variant enters the specification range starting from 2019, while both BlueHDi variants are listed from 2017, reflecting a later introduction for the plug-in hybrid powertrain within the same model lineup.

Other Systems