Dodge Viper, ZB (USA / CAN)
Manual transmission fluid capacity & service interval
Dodge Viper, ZB (USA / CAN) manual transmission fluid capacity ranges from 3,8 to 3,9 liters. Service intervals include 12000 miles/12 months, 21000 miles, 24000 miles, and 36000 miles/36 months. The data covers 6 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Viper SRT-10 (USA), Phase II ZB (2008-2010) |
|
| Viper SRT-10 (USA), Phase II ZB (2008-2010) |
|
| Viper SRT-10 (USA), Phase I ZB (2004-2007) |
|
| Viper SRT-10 (USA), Phase I ZB (2004-2007) |
|
| Viper SRT-10 (USA), Phase I ZB (2003-2004) |
|
| Viper SRT-10 (USA), Phase I ZB (2003-2004) |
|
Additional Notes
- The Dodge Viper SRT-10 Phase I ZB, covering 2003-2007, carries a manual transmission fluid capacity of 3.8 liters, which represents the service fill volume for maintaining proper gear lubrication.
- Phase II ZB models from 2008-2010 show a slightly increased manual transmission fluid capacity of 3.9 liters, a modest but distinct difference from the Phase I figure.
- For Phase I ZB models spanning 2003-2007, no change interval is listed under normal use conditions, while severe use calls for a fluid change at 21,000 miles.
- The Phase II ZB under normal use conditions introduces a fluid level check interval at 12,000 miles or 12 months, a specification absent from the Phase I rows entirely.
- Under normal use, the Phase II ZB specifies a fluid change at 36,000 miles or 36 months, a considerably longer interval than the 24,000-mile severe use change interval for the same generation.
- The severe use change interval for the Phase II ZB is set at 24,000 miles, which is notably longer than the 21,000-mile severe use interval assigned to Phase I ZB models across 2003-2007.