Cupra Terramar, KP1

Brake fluid capacity & service interval

Cupra Terramar, KP1 uses brake fluid with a capacity of 1,15 liters. The service interval for the fluid is 24 months. The data covers 2 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • Terramar 1.5 eTSI (110 kW) PF (2024- )
  • ABS
  • Use: Normal
  • Capacity 1,15 liter
  • Change 24 months
  • Terramar 2.0 TSI 4Drive VZ (195 kW) PF (2024- )
  • ABS
  • Use: Normal
  • Capacity 1,15 liter
  • Change 24 months

Additional Notes

  • Both the Terramar 1.5 eTSI (110 kW) and the 2.0 TSI 4Drive VZ (195 kW) share an identical brake fluid capacity of 1.15 liters, which is a service fill figure covering the hydraulic brake and clutch system including ABS.
  • A 1.15-liter capacity is consistent with a sealed hydraulic circuit where fluid is topped up or exchanged during routine maintenance rather than a full system overhaul requiring a larger volume.
  • The specified change interval for both configurations is 24 months under normal use conditions, meaning the replacement schedule is time-based rather than mileage-based.
  • A 24-month brake fluid interval reflects the hygroscopic nature of brake fluid, which absorbs moisture from the atmosphere over time and lowers its boiling point regardless of how many kilometers have been driven.
  • The Cupra Terramar KP1 specifications apply uniformly across the 1.5 eTSI and 2.0 TSI 4Drive VZ engine variants for the 2024 model year, with no differentiation in brake fluid capacity or change interval between the two powertrains.

Other Systems