Cupra Terramar, KP1

Automatic transmission fluid capacity & service interval

Cupra Terramar, KP1 uses automatic transmission fluid with a capacity range of 6 to 8,1 liters. Service intervals include 60000 km and 120000 km. The data covers 3 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Terramar 1.5 eTSI (110 kW) PF (2024- )
  • Use: Normal
  • Capacity 6,9 liter (Initial fill)
  • Capacity 6 liter (Service fill)
  • Change 120000 km
  • Code: 0GC 7/1
Terramar 1.5 TSI e-Hybrid (200 kW) PF (2024- )
  • Use: Normal
  • Capacity 8,1 liter (Initial fill)
  • Capacity 7 liter (Service fill)
  • Change 60000 km
  • Code: 0DD (DQ400E) 6/1
Terramar 2.0 TSI 4Drive VZ (195 kW) PF (2024- )
  • Use: Normal
  • Capacity 6,9 liter (Initial fill)
  • Capacity 6 liter (Service fill)
  • Change 120000 km
  • Code: 0GC 7/1

Additional Notes

  • The Cupra Terramar 1.5 TSI e-Hybrid (200 kW) carries an initial fill capacity of 8.1 liters, which is the total fluid volume required when filling a dry or overhauled transaxle from empty.
  • The service fill capacity for the 1.5 TSI e-Hybrid (200 kW) is 7 liters, reflecting the smaller volume needed during a routine fluid change, since residual fluid remains in the torque converter and passages after draining.
  • Both the 1.5 eTSI (110 kW) and the 2.0 TSI 4Drive VZ (195 kW) share an initial fill capacity of 6.9 liters and a service fill capacity of 6.0 liters, despite differing significantly in output and drivetrain configuration.
  • The 1.5 TSI e-Hybrid (200 kW) has a fluid change interval of 60,000 km under normal use conditions, which is half the interval specified for the other two configurations.
  • The 1.5 eTSI (110 kW) and the 2.0 TSI 4Drive VZ (195 kW) both carry a 120,000 km change interval under normal use conditions, double that of the hybrid variant.
  • All three configurations are noted as transaxle, semi-automatic units, meaning the transmission and drive axle share a common housing, which directly influences the fluid capacities listed for each.
  • The difference between the 8.1-liter initial fill and the 7.0-liter service fill on the 1.5 TSI e-Hybrid (200 kW) represents a 1.1-liter retention volume, while the gap on the other two configurations is 0.9 liters between their respective initial and service fill values.

Other Systems