Citroën C-Crosser

Automatic transmission fluid capacity & service interval

Citroën C-Crosser automatic transmission fluid capacity ranges from 5,5 to 7,6 liters. Service intervals include checking every 15000 km or 12 months and changing every 30000 km or 36 months. The data covers 3 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • C-Crosser 2.2 HDi DPF (2012-2012)
  • DCT
  • Use: Normal
  • Capacity 7,6 liter (Dry fill)
  • Capacity 5,5 liter (Service fill)
  • Change 30000 km/ 36 months
  • Code: Getrag DCS6 6/1
  • C-Crosser 2.2 HDi DPF (2009-2011)
  • DCT
  • Use: Normal
  • Capacity 7,6 liter (Dry fill)
  • Capacity 5,5 liter (Service fill)
  • Change 30000 km/ 36 months
  • Code: Getrag DCS6 6/1
C-Crosser 2.4 16V (2007-2009)
  • Use: Normal
  • Capacity 7,6 liter
  • Check 15000 km/ 12 months
  • Code: AM6 6/1

Additional Notes

  • The Citroën C-Crosser 2.2 HDi DPF carries a dry fill capacity of 7.6 liters, which represents the total fluid volume required when filling a completely drained or rebuilt transaxle from empty.
  • The service fill capacity for the 2.2 HDi DPF semi-automatic DCT transaxle is 5.5 liters, reflecting the smaller volume needed during a routine fluid change, since residual fluid remains in the unit after draining.
  • The 2.1-liter difference between the dry fill and service fill on the 2.2 HDi DPF transaxle indicates a notable volume of fluid is retained within the unit during a standard drain, which is a common characteristic of dual-clutch transaxle designs.
  • The 2.2 HDi DPF semi-automatic DCT transaxle, covering the 2009-2012 model years across both listed configurations, carries a fluid change interval of 30,000 km or 36 months under normal use conditions.
  • The 2.4 16V automatic transaxle, covering 2007-2009, lists only a single capacity figure of 7.6 liters without a separate service fill value, unlike the 2.2 HDi DPF configurations which distinguish between dry and service fill volumes.
  • Rather than a change interval, the 2.4 16V automatic transaxle specifies a fluid check at 15,000 km or 12 months under normal use, indicating a monitoring-based maintenance approach rather than scheduled replacement at that interval.

Other Systems