Citroën C-Elysée

Automatic transmission fluid capacity & service interval

Citroën C-Elysée automatic transmission fluid capacity ranges from 2 to 7 liters. Service intervals are not specified. The data covers 8 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
C-Elysée 1.2 Puretech 82, HMR (2018- )
  • Use: Normal
  • Capacity 2,1 liter (Dry fill)
  • Capacity 2 liter (Service fill)
  • Code: MAPS 5/1
C-Elysée 1.6 VTI, NFP (2017- )
  • Use: Normal
  • Capacity 7 liter (Dry fill)
  • Capacity 3-4 liter (Service fill)
  • Code: AT6 III 6/1
C-Elysée 1.6 VTI, NFP (2017- )
  • Use: Normal
  • Capacity 5,85 liter (Dry fill)
  • Capacity 3 liter (Service fill)
  • Code: AT8 4/1
C-Elysée 1.2 82, HMZ (2016-2018)
  • Use: Normal
  • Capacity 2,1 liter (Dry fill)
  • Capacity 2 liter (Service fill)
  • Code: MAPS 5/1
C-Elysée 1.2 VTI, HMY (2013-2017)
  • Use: Normal
  • Capacity 2,1 liter (Dry fill)
  • Capacity 2 liter (Service fill)
  • Code: MAPS 5/1
C-Elysée 1.6 BlueHDI 100 DPF, BHY (2013- )
  • Use: Normal
  • Capacity 2,1 liter (Dry fill)
  • Capacity 2 liter (Service fill)
  • Code: MAP 5/1
C-Elysée 1.6 VTI, NFP (2013-2017)
  • Use: Normal
  • Capacity 7 liter (Dry fill)
  • Capacity 3-4 liter (Service fill)
  • Code: AT6 III 6/1
C-Elysée 1.6 VTI, NFP (2013-2017)
  • Use: Normal
  • Capacity 5,85 liter (Dry fill)
  • Capacity 3 liter (Service fill)
  • Code: AT8 4/1

Additional Notes

  • The semi-automatic transaxle fitted to the Citroën C-Elysée 1.2 82 (HMZ), 1.2 Puretech 82 (HMR), 1.2 VTI (HMY), and 1.6 BlueHDI 100 DPF (BHY) variants shares identical fluid capacities across all four engine codes: 2.1 liters for a dry fill and 2.0 liters for a service fill.
  • The 0.1-liter difference between the dry fill and service fill on the semi-automatic transaxle reflects the small volume of fluid that remains trapped in internal passages and the torque actuator circuit after a drain, meaning a routine service refill requires slightly less fluid than filling a completely empty unit.
  • The 1.6 VTI (NFP) with a conventional automatic transaxle carries two distinct dry fill figures in the specifications: 7.0 liters and 5.85 liters. This indicates two different transmission variants are applicable to the NFP engine code, each with a different total internal volume.
  • For the 1.6 VTI (NFP) automatic transaxle with a 7.0-liter dry fill, the service fill is listed as a range of 3 to 4 liters, acknowledging that the volume recovered during a drain can vary depending on fluid temperature, drain duration, and whether the torque converter is emptied.
  • The 1.6 VTI (NFP) automatic transaxle with a 5.85-liter dry fill has a fixed service fill of 3.0 liters, suggesting a more predictable drain recovery for that particular unit compared to the 7.0-liter variant.
  • The gap between the 7.0-liter dry fill and the 3 to 4-liter service fill on the NFP automatic transaxle means roughly half or more of the total fluid volume remains in the unit during a standard service drain, which is typical for automatic transmissions where the torque converter retains fluid unless specifically purged.
  • The NFP automatic transaxle specifications appear identically across the 2013-2017 and 2017 onward year bands, with both the 7.0-liter and 5.85-liter dry fill variants listed for each period, indicating no capacity change was introduced at the 2017 model year boundary.
  • All rows across the semi-automatic and automatic transaxle configurations are designated for normal use conditions, meaning none of the listed capacities or fill figures are adjusted for severe-duty or high-cycle operating environments.

Other Systems