Chrysler 200, JS (USA / CAN)

Brake fluid capacity & service interval

Chrysler 200, JS (USA / CAN) requires brake fluid with a capacity range of min to max. Service intervals include normal use. The data covers 6 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
200 2.4 16V (2013-2014)
  • Use: Normal
  • Between min and max.
200 3.6 V6 (2013-2014)
  • Use: Normal
  • Between min and max.
200 3.6 V6 (2013-2014)
  • Use: Normal
  • Between min and max.
200 2.4 16V (2011-2013)
  • Use: Normal
  • Between min and max.
200 3.6 V6 (2011-2013)
  • Use: Normal
  • Between min and max.
200 3.6 V6 (2011-2013)
  • Use: Normal
  • Between min and max.

Additional Notes

  • Across all listed configurations of the Chrysler 200 JS, the brake fluid specification for the hydraulic brake system is expressed as a fill level rather than a fixed volume, with the accepted range falling between the reservoir's minimum and maximum markers.
  • The 2.4 16V four-cylinder engine appears in two overlapping model year groupings, covering 2011-2013 and 2013-2014, with both sharing the same between-min-and-max fill specification for the hydraulic brake system under normal use conditions.
  • The 3.6 V6 engine follows the same pattern, with entries spanning 2011-2013 and 2013-2014, and all rows carry an identical between-min-and-max specification for the hydraulic brake system under normal use conditions.
  • A between-min-and-max specification, rather than a precise fluid volume, is characteristic of brake fluid servicing, where the reservoir level is inspected and topped off as needed rather than fully drained and refilled to a measured capacity.
  • The normal use condition applied to every listed row indicates the specifications reflect standard operating environments, without a separate severe-duty interval or fill level defined for either engine configuration across the 2011-2014 span.

Other Systems