Chrysler 200, JS (USA / CAN)

Additional Notes

• The Chrysler 200 JS automatic transaxle carries a dry fill capacity of either 8.5 or 8.7 liters depending on the variant, figures that represent the total fluid volume required when filling a completely empty unit such as after a full overhaul or replacement.
• Service fill capacity, which reflects the amount of fluid exchanged during a routine drain-and-refill procedure, is listed at either 3.8 or 5.2 liters across all configurations, meaning a significant portion of fluid remains in the torque converter and passages during a standard service.
• The gap between the 8.5 or 8.7 liter dry fill and the 3.8 or 5.2 liter service fill values indicates that a single drain-and-refill replaces roughly 44 to 61 percent of the total fluid volume, leaving residual fluid in the system.
• For the 2.4 16V and 3.6 V6 engines covering model years 2011-2013, the normal-use change interval is set at 120,000 miles or 90 months, whichever comes first.
• Under severe use conditions for the same 2011-2013 engines, the change interval shortens considerably to 64,000 miles or 48 months, roughly halving both the mileage and time thresholds compared to normal use.
• For the 2013-2014 model year range across both the 2.4 16V and 3.6 V6, the normal-use interval extends to 120,000 miles or 144 months, meaning the time component increased from 90 months to 144 months relative to the earlier 2011-2013 specification.
• The severe-use interval for 2013-2014 configurations is listed at 60,000 miles or 72 months, a change from the 64,000-mile and 48-month figures applied to the 2011-2013 severe-use rows, with the mileage threshold decreasing slightly and the time threshold increasing substantially.
• Both the 2.4 16V and 3.6 V6 engines share identical capacity and interval figures within the same model year grouping, indicating no differentiation in automatic transaxle service specifications between the four-cylinder and V6 powertrains for the 200 JS.