Chery Tengo
Coolant capacity & service interval
Chery Tengo coolant capacity is 7 liters. Service intervals are 40000 km or 24 months. The data covers 8 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Tengo 1.6 (88 kW) (2008-2015) |
|
| Tengo 1.6 (95 kW) (2008-2015) |
|
| Tengo 1.8 (2008-2015) |
|
| Tengo 2.0 (2008-2015) |
|
| Tengo 1.6 (88 kW) (2008-2015) |
|
| Tengo 1.6 (95 kW) (2008-2015) |
|
| Tengo 1.8 (2008-2015) |
|
| Tengo 2.0 (2008-2015) |
|
Additional Notes
- The Chery Tengo cooling system capacity is 7 liters across all engine variants in the 2008-2015 range, covering the 1.6 (88 kW), 1.6 (95 kW), 1.8, and 2.0 configurations. A 7-liter figure represents a full cooling system fill, accounting for the radiator, engine block passages, heater core, and associated hoses.
- The coolant change interval for all Tengo engine variants under normal use conditions is set at 40,000 km or 24 months, whichever comes first. The dual-trigger structure of this interval means time elapsed can mandate a change even when the mileage threshold has not been reached.
- Normal use conditions, as tied to the 40,000 km / 24-month interval here, reflect standard operating environments rather than elevated thermal or load stress. All listed Tengo configurations share identical interval specifications under normal use.
- The two 1.6-liter variants, rated at 88 kW and 95 kW respectively, both carry the same 7-liter capacity and 40,000 km / 24-month service interval despite differing in power output. The power difference between the two 1.6 variants does not correspond to any variation in cooling system capacity or service schedule.
- The 1.8 and 2.0 engine variants also share the 7-liter cooling system capacity with the 1.6 variants. Across all four engine configurations spanning the 2008-2015 period, no variation in either capacity or change interval is present in the specifications.