Chery Tengo
Brake fluid capacity & service interval
Chery Tengo requires brake fluid with a capacity range of 0.5 to 1.0 liters. Service intervals occur every 50000 km or 24 months. The data covers 8 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Tengo 1.6 (88 kW) (2008-2015) |
|
| Tengo 1.6 (95 kW) (2008-2015) |
|
| Tengo 1.8 (2008-2015) |
|
| Tengo 2.0 (2008-2015) |
|
| Tengo 1.6 (88 kW) (2008-2015) |
|
| Tengo 1.6 (95 kW) (2008-2015) |
|
| Tengo 1.8 (2008-2015) |
|
| Tengo 2.0 (2008-2015) |
|
Additional Notes
- The Chery Tengo brake fluid reservoir is filled to a level between the minimum and maximum marks. No fixed volume figure is specified, as the reservoir level serves as the reference point rather than a measured capacity.
- The hydraulic brake and clutch system shares a single fluid circuit across all Tengo variants. The fill level guidance of between min and max applies to both functions within that shared system.
- A change interval of 50,000 km or 24 months, whichever comes first, applies under normal use conditions across the 1.6 (88 kW), 1.6 (95 kW), 1.8, and 2.0 engine variants for the 2008-2015 model years.
- The 24-month time limit on the change interval reflects a known property of brake fluid: glycol-based formulations absorb moisture over time, which lowers the boiling point regardless of distance driven. The interval accounts for both usage and calendar aging.
- No variation in the service interval exists across the four engine configurations covered. The 50,000 km or 24-month schedule is uniform from the 1.6 (88 kW) entry-level output to the 2.0 displacement variant.