BMW X6, G06 / F96 (EU)
Transfer case fluid capacity & service interval
BMW X6, G06 / F96 (EU) transfer case fluid capacity is 0,7 liter. Service intervals include normal use. Data covers 5 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| X6 Mild-Hybrid xDrive 30d (219 kW) (2023- ) |
|
| X6 Mild-Hybrid xDrive40i PF (280 kW) (2023- ) |
|
| X6 Mild-Hybrid xDrive 30d (210 kW) (2020-2023) |
|
| X6 Mild-Hybrid xDrive 40d (250 kW) (2020-2023) |
|
| X6 Mild-Hybrid xDrive40i PF (245 kW) (2020-2023) |
|
Additional Notes
- The BMW X6 G06/F96 (EU) transfer case fluid capacity is listed at 0,7 liter across all five configurations covered in the specifications, spanning both diesel and petrol mild-hybrid xDrive variants from 2020 onward.
- A 0,7 liter figure represents a relatively small fluid volume, consistent with the typical fill capacity of a compact transfer case unit rather than a full overhaul or drain-and-refill of a larger drivetrain component.
- All five rows carry a "normal" use condition designation, meaning the 0,7 liter capacity value applies specifically under standard operating conditions rather than severe-duty cycles.
- The xDrive 30d variant appears in two separate power output configurations: 210 kW covering 2020-2023 and 219 kW starting from 2023, yet both share the identical 0,7 liter transfer case fluid capacity.
- A similar pattern is present in the petrol mild-hybrid line, where the xDrive40i PF is listed at 245 kW for 2020-2023 and at 280 kW starting from 2023, with no change to the 0,7 liter transfer case capacity between the two output levels.
- The xDrive 40d at 250 kW, covering 2020-2023, also holds to the 0,7 liter specification, indicating the transfer case fluid volume does not vary between the diesel and petrol mild-hybrid powertrains within the G06/F96 platform as listed.