BMW X6, G06 / F96 (EU)

Automatic transmission fluid capacity & service interval

BMW X6, G06 / F96 (EU) uses automatic transmission fluid with a capacity of 9,35 liters. The data covers 2 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
X6 M Competition xDrive PF (460 kW) (2020-2023)
  • Use: Normal
  • Capacity 9,35 liter (Initial fill)
  • Code: ZF GA8HP76X 8/1
X6 M xDrive PF (441 kW) (2020-2023)
  • Use: Normal
  • Capacity 9,35 liter (Initial fill)
  • Code: ZF GA8HP76X 8/1

Additional Notes

  • Both the X6 M Competition xDrive PF (460 kW) and the X6 M xDrive PF (441 kW) share an identical automatic transmission fluid capacity of 9.35 liters, specified as an initial fill.
  • An initial fill figure represents the fluid volume loaded into the transmission during factory assembly or a full overhaul, rather than the smaller quantity typically involved in a routine drain-and-refill service.
  • The 9.35-liter initial fill capacity applies uniformly across the 2020-2023 model years for both M-variant configurations listed, with no year-to-year variation recorded within that range.
  • Both entries carry a normal use condition, meaning the 9.35-liter initial fill specification is associated with standard operating conditions rather than a severe-duty or first-change-only service scenario.
  • The two variants differ in output, with the M Competition rated at 460 kW and the standard M xDrive rated at 441 kW, yet the BMW X6 G06/F96 automatic transmission fluid capacity remains unchanged between them at 9.35 liters.

Other Systems