Acura ZDX (USA / CAN)

Transfer case fluid capacity & service interval

Acura ZDX (USA / CAN) requires transfer case fluid with a capacity range of 0,4 to 0,5 liters. The data covers 1 configuration.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
ZDX 3.7 V6 (USA) (2010-2013)
  • Use: Normal
  • Capacity 0,4-0,5 liter

Additional Notes

  • The Acura ZDX 3.7 V6 (USA) transfer case fluid capacity falls within a range of 0.4 to 0.5 liters, which is a notably small volume reflecting the compact nature of the transfer case unit in this all-wheel-drive system.
  • The 0.1-liter spread between the lower and upper capacity figures for the 2010-2013 ZDX 3.7 V6 (USA) suggests a service fill tolerance rather than a fixed drain-and-refill target, meaning the accepted quantity depends on the fluid level at the fill port rather than a precise measured amount.
  • The listed use condition for the 2010-2013 ZDX 3.7 V6 (USA) transfer case fluid is normal, meaning the 0.4-0.5 liter capacity specification applies under standard operating conditions rather than a severe-duty service scenario.

Other Systems