Acura ZDX (USA / CAN)
Automatic transmission fluid capacity & service interval
Acura ZDX (USA / CAN) automatic transmission fluid capacity ranges from 3,1 to 8 liters. The data covers 1 configuration.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| ZDX 3.7 V6 (USA) (2010-2013) |
|
Additional Notes
- The dry fill capacity for the Acura ZDX 3.7 V6 (USA) automatic transmission is 8 liters, a figure that reflects a complete overhaul or rebuild scenario where the torque converter and all internal passages are fully drained and refilled from empty.
- The service fill capacity of 3.1 liters represents the more commonly encountered volume, applied during a routine fluid drain and refill where residual fluid remains in the torque converter and valve body.
- The gap between the 8-liter dry fill and the 3.1-liter service fill indicates that roughly 4.9 liters of fluid is retained within the transmission assembly during a standard service procedure, which is typical for automatic transmissions without a dedicated drain plug on the torque converter.
- Both the dry fill and service fill values listed apply under normal use conditions for the 2010-2013 model years, meaning the specifications are not adjusted for severe driving cycles in the available data.