Acura ZDX (USA / CAN)

Coolant capacity & service interval

Acura ZDX (USA / CAN) coolant capacity ranges from 6,7 to 8,6 liters. The data covers 1 configuration.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
ZDX 3.7 V6 (USA) (2010-2013)
  • Use: Normal
  • Capacity 8,6 liter (Dry fill)
  • Capacity 6,7 liter (Service fill)

Additional Notes

  • The Acura ZDX 3.7 V6 (USA) cooling system carries a dry fill capacity of 8.6 liters, a figure that reflects the total volume of the entire cooling circuit when completely empty, such as after a full engine or radiator replacement.
  • The service fill capacity for the same configuration is 6.7 liters, representing the amount of coolant needed during a routine drain-and-refill procedure, where residual fluid remains in the block and heater core passages.
  • The gap between the 8.6-liter dry fill and the 6.7-liter service fill amounts to approximately 1.9 liters, which corresponds to the coolant volume that typically stays trapped in the system during a standard service drain.
  • Both the dry fill and service fill values for the ZDX 3.7 V6 (USA) apply under normal use conditions across the 2010-2013 model years, with no separate severe-use interval or capacity listed in the specifications.

Other Systems