Valtra (Valmet) T5 Direct
Differential fluid capacity & service interval
Valtra (Valmet) T5 Direct differential fluid capacity is 8,5 liters. Service intervals include checks every 600 hours and changes every 1200 hours or 12 months. The data covers 7 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Additional Notes
- The front differential capacity across all Valtra (Valmet) T5 Direct variants — T145 through T255 — is uniformly 8.5 liters, indicating a shared front axle housing design across the entire lineup regardless of power rating.
- A 8.5-liter capacity for a front differential is consistent with heavy agricultural tractor front axles, where the housing must accommodate both the differential gearing and the planetary reduction units at each wheel end.
- The check interval is set at 600 hours under normal use conditions, meaning fluid level and condition are inspected at that point without a mandatory drain and refill.
- The change interval is 1,200 hours or 12 months under normal use conditions, whichever comes first. The dual-trigger structure means a tractor used lightly enough to reach 12 months before 1,200 hours still requires a fluid change at the calendar threshold.
- The 600-hour check interval falls exactly at the midpoint of the 1,200-hour change interval, placing one inspection between each successive fluid change.
- All seven variants — T145, T155, T175, T195, T215, T235, and T255 Direct — share identical front differential service intervals, reflecting a common servicing schedule across the T5 Direct range starting from 2021.