Valtra (Valmet) T5 HiTech

Differential fluid capacity & service interval

Valtra (Valmet) T5 HiTech differential fluid capacity is 8,5 liters. Service intervals include checking at 600 hours and changing at 1200 hours or 12 months. The data covers 7 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • T145 HiTech (2021- )
  • Front
  • Use: Normal
  • Capacity 8,5 liter
  • Check 600 hours
  • Change 1200 hours/ 12 months
  • Code: Dana
  • T155 HiTech (2021- )
  • Front
  • Use: Normal
  • Capacity 8,5 liter
  • Check 600 hours
  • Change 1200 hours/ 12 months
  • Code: Dana
  • T175 HiTech (2021- )
  • Front
  • Use: Normal
  • Capacity 8,5 liter
  • Check 600 hours
  • Change 1200 hours/ 12 months
  • Code: Dana
  • T195 HiTech (2021- )
  • Front
  • Use: Normal
  • Capacity 8,5 liter
  • Check 600 hours
  • Change 1200 hours/ 12 months
  • Code: Dana
  • T215 HiTech (2021- )
  • Front
  • Use: Normal
  • Capacity 8,5 liter
  • Check 600 hours
  • Change 1200 hours/ 12 months
  • Code: Dana
  • T235 HiTech (2021- )
  • Front
  • Use: Normal
  • Capacity 8,5 liter
  • Check 600 hours
  • Change 1200 hours/ 12 months
  • Code: Dana
  • T255 HiTech (2021- )
  • Front
  • Use: Normal
  • Capacity 8,5 liter
  • Check 600 hours
  • Change 1200 hours/ 12 months
  • Code: Dana

Additional Notes

  • The front differential fluid capacity for all Valtra T5 HiTech variants is 8.5 liters, a figure consistent across the T145, T155, T175, T195, T215, T235, and T255 model designations introduced from 2021.
  • An 8.5-liter front differential capacity is relatively substantial for agricultural tractor front axles, reflecting the heavy-duty construction typical of high-horsepower machines in the T5 HiTech class.
  • All seven variants share an identical check interval of 600 hours under normal use conditions, meaning fluid level verification is due at the halfway point between full drain-and-fill service events.
  • The fluid change interval is specified at 1,200 hours or 12 months under normal use conditions, whichever comes first. The dual-trigger format means calendar time can mandate a change even when the hour threshold has not been reached.
  • The 600-hour check interval sitting at exactly half the 1,200-hour change interval follows a common service logic where an intermediate inspection catches fluid degradation or contamination before the scheduled replacement.
  • No variation in front differential fluid capacity or service intervals exists across the T145 through T255 HiTech range, indicating a shared front axle assembly regardless of the power output differences between model designations.

Other Systems