Valtra (Valmet) T5 Active
Differential fluid capacity & service interval
Valtra (Valmet) T5 Active differential fluid capacity is 8,5 liters. Service intervals include checks at 600 hours and changes at 1200 hours or 12 months. The data covers 7 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Additional Notes
- The front differential capacity across all Valtra T5 Active variants — the T145, T155, T175, T195, T215, T235, and T255 — is uniformly 8.5 liters, indicating a shared front axle housing design regardless of power rating.
- An 8.5-liter front differential fill is a substantial volume, consistent with the heavy-duty front axle assemblies found on large agricultural tractors, where the housing must accommodate both the differential gearing and the final drive components within the same fluid bath.
- The check interval is set at 600 hours under normal use conditions, meaning fluid level and condition are inspected at that point without a mandatory drain and refill.
- The change interval is 1,200 hours or 12 months under normal use conditions, whichever comes first. The dual-trigger structure means a tractor used lightly enough to reach 12 months before accumulating 1,200 hours still requires a fluid change at the calendar threshold.
- The check interval at 600 hours falls exactly at the midpoint of the 1,200-hour change interval, creating a two-stage service structure where the fluid is inspected once between each full change cycle.
- All seven T5 Active variants share identical front differential service intervals, with no variation in check or change schedules across the model range from the T145 to the T255.