Valtra (Valmet) T2 Versu

Differential fluid capacity & service interval

Valtra (Valmet) T2 Versu differential fluid capacity ranges from 7,4 to 7,9 liters. Service intervals include a 50 hour check and a 1000 hour or 12 month change. The data covers 7 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • T132 V (2010-2012)
  • Front
  • Use: Normal
  • Capacity 7,4 liter (Industrial)
  • Capacity 7,9 liter (Agricultural)
  • Check 50 hours
  • Change 1000 hours/ 12 months
  • T152 V (2010-2012)
  • Front
  • Use: Normal
  • Capacity 7,4 liter (Industrial)
  • Capacity 7,9 liter (Agricultural)
  • Check 50 hours
  • Change 1000 hours/ 12 months
  • T162 V (2010-2012)
  • Front
  • Use: Normal
  • Capacity 7,4 liter (Industrial)
  • Capacity 7,9 liter (Agricultural)
  • Check 50 hours
  • Change 1000 hours/ 12 months
  • T162e V (ECO) (2010-2012)
  • Front
  • Use: Normal
  • Capacity 7,4 liter (Industrial)
  • Capacity 7,9 liter (Agricultural)
  • Check 50 hours
  • Change 1000 hours/ 12 months
  • T172 V (2010-2012)
  • Front
  • Use: Normal
  • Capacity 7,4 liter (Industrial)
  • Capacity 7,9 liter (Agricultural)
  • Check 50 hours
  • Change 1000 hours/ 12 months
  • T182 V (2010-2012)
  • Front
  • Use: Normal
  • Capacity 7,4 liter (Industrial)
  • Capacity 7,9 liter (Agricultural)
  • Check 50 hours
  • Change 1000 hours/ 12 months
  • T202 V (2010-2012)
  • Front
  • Use: Normal
  • Capacity 7,4 liter (Industrial)
  • Capacity 7,9 liter (Agricultural)
  • Check 50 hours
  • Change 1000 hours/ 12 months

Additional Notes

  • All seven T2 Versu variants covered in the 2010-2012 model range share identical front differential fluid capacities, with the figure varying by application type rather than by engine or trim level.
  • The Industrial application front differential capacity is 7.4 liters, while the Agricultural application carries a slightly higher capacity of 7.9 liters. The 0.5-liter difference between the two application types reflects differing axle configurations or housing designs suited to each working environment.
  • The Valtra (Valmet) T2 Versu front differential fluid check interval is set at 50 hours of operation under normal use conditions. A 50-hour check interval is typical for heavy-duty drivetrain components in tractors, where early detection of fluid contamination or level loss is critical during regular field or industrial work cycles.
  • The fluid change interval for the front differential is 1,000 hours or 12 months, whichever comes first, under normal use conditions. The dual-trigger format means calendar time alone can mandate a change even when the hourly threshold has not been reached, which is relevant for lower-utilization machines.
  • The T162e V (ECO) variant shares the same 7.4-liter (Industrial) and 7.9-liter (Agricultural) front differential capacities as the rest of the T2 Versu range, indicating the ECO designation does not alter the front axle hardware or its fluid volume requirements.
  • The consistent front differential specifications across the T132 V through T202 V suggest a common front axle assembly is used throughout the T2 Versu lineup for the 2010-2012 period, despite the range spanning notably different power outputs as implied by the model numbering.

Other Systems