Valtra (Valmet) N2 Versu

Differential fluid capacity & service interval

Valtra (Valmet) N2 Versu differential fluid capacity ranges from 6,9 to 7,9 liters. Service intervals include a check at 50 hours and a change at 1000 hours or 12 months. The data covers 2 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • N122 V (2010-2012)
  • Front
  • Use: Normal
  • Capacity 7,4 liter (Industrial)
  • Capacity 6,9-7,9 liter (Agricultural)
  • Check 50 hours
  • Change 1000 hours/ 12 months
  • N142 V (2010-2012)
  • Front
  • Use: Normal
  • Capacity 7,4 liter (Industrial)
  • Capacity 6,9-7,9 liter (Agricultural)
  • Check 50 hours
  • Change 1000 hours/ 12 months

Additional Notes

  • The front differential on the Valtra (Valmet) N2 Versu carries a fixed service fill capacity of 7.4 liters under the Industrial use classification, while the Agricultural classification lists a capacity range of 6.9–7.9 liters for the same component.
  • The Agricultural capacity range of 6.9–7.9 liters reflects a tolerance band rather than a single target volume, which is common in axle and differential assemblies where fluid level is verified by a fill plug port rather than a measured pour.
  • Both the N122 V and N142 V share identical front differential capacity figures across both the Industrial and Agricultural classifications, indicating no differentiation in fluid volume requirements between the two engine variants for this system.
  • The check interval for the front differential is set at 50 hours under normal use conditions, a relatively short inspection cycle consistent with early-service monitoring of a working axle assembly.
  • The change interval is specified at 1000 hours or 12 months under normal use conditions, whichever comes first, applying equally to both the N122 V and N142 V across the 2010-2012 model years.
  • The dual-trigger change interval of 1000 hours or 12 months means calendar time can mandate a fluid change before the hour threshold is reached, which is relevant for machines operating at lower annual usage rates.

Other Systems