Valtra (Valmet) N2 Versu

Coolant capacity & service interval

Valtra (Valmet) N2 Versu coolant capacity is 22 liters. Service intervals include a 10 hour check and a 2000 hour or 24 month change. The data covers 2 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
N122 V (2010-2012)
  • Use: Normal
  • Capacity 22 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
N142 V (2010-2012)
  • Use: Normal
  • Capacity 22 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months

Additional Notes

  • Both the N122 V and N142 V share an identical cooling system capacity of 22 liters, which represents the total fluid volume held within the cooling circuit under normal service fill conditions.
  • The check interval for the cooling system is set at every 10 hours of operation, a notably short interval that reflects the importance of early detection of coolant level loss in agricultural machinery operating under variable load conditions.
  • The change interval for both engine variants is 2000 hours or 24 months, whichever comes first, meaning time elapsed can trigger a fluid change even when the hour threshold has not been reached.
  • The 24-month calendar limit on coolant changes is tied to the degradation of corrosion inhibitors and antifreeze additives over time, which occurs independently of engine operating hours.
  • The Valtra (Valmet) N2 Versu N122 V and N142 V, despite differing in engine displacement as indicated by their model designations, carry the same 22-liter cooling system capacity across the 2010-2012 model years.

Other Systems