Valtra (Valmet) N2 Direct
Differential fluid capacity & service interval
Valtra (Valmet) N2 Direct uses differential fluid with a capacity range of 6,9 to 7,9 liters. Service intervals include a check at 50 hours and a change at 1000 hours or 12 months. The data covers 2 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
|
|
|
|
Additional Notes
- The front differential on the Valtra (Valmet) N2 Direct carries a fixed 7.4-liter capacity under an Industrial configuration, while the Agricultural configuration specifies a range of 6.9 to 7.9 liters, reflecting differences in how the system is filled or measured across application types.
- The 1.0-liter spread in the Agricultural capacity figure, from 6.9 to 7.9 liters, is wider than a typical manufacturing tolerance and likely accounts for variation in mounting angle, axle load settings, or fill-point access across different agricultural equipment setups.
- Both the N122 D and N142 D share identical front differential capacity values and service intervals across the 2010-2012 model years, meaning the difference in engine designation between the two does not produce any variation in differential fluid specifications.
- A check interval of 50 hours is specified under normal use conditions, which in tractor service terms represents a relatively short inspection cycle and reflects the high mechanical stress placed on front differentials during field operation.
- The change interval is set at 1000 hours or 12 months under normal use, whichever comes first, meaning calendar time alone can trigger a fluid change even when the hour threshold has not been reached.