Valtra (Valmet) N2 Direct

Brake fluid capacity & service interval

Valtra (Valmet) N2 Direct uses brake fluid with a capacity of 0,5 liter. Service intervals include a check at 10 hours and a change at 2000 hours or 24 months. The data covers 2 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
N122 D (2010-2012)
  • Use: Normal
  • Capacity 0,5 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
N142 D (2010-2012)
  • Use: Normal
  • Capacity 0,5 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months

Additional Notes

  • The Valtra (Valmet) N2 Direct hydraulic brake system holds 0.5 liter of brake fluid across both the N122 D and N142 D configurations, covering the 2010-2012 model years.
  • A check interval of 10 operating hours applies to the hydraulic brake system on both the N122 D and N142 D, reflecting a relatively short inspection cycle typical of working machinery subject to frequent load and heat cycles.
  • The change interval for brake fluid on both configurations is set at 2000 hours or 24 months under normal use conditions, meaning whichever threshold is reached first triggers a fluid replacement.
  • The 24-month calendar limit on the change interval acknowledges that brake fluid degrades through moisture absorption over time, independent of how many operating hours have accumulated.
  • The N122 D and N142 D share identical brake fluid capacity and service interval specifications across the 2010-2012 period, indicating no differentiation in hydraulic brake system design between the two engine variants.

Other Systems