Valtra (Valmet) F5 Series
Coolant capacity & service interval
Valtra (Valmet) F5 Series coolant capacity is 18 liters. Service intervals include checks every 10 hours and changes every 2400 hours or 24 months. The data covers 4 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| F 105 (2019- ) |
|
| F 75 (2019- ) |
|
| F 85 (2019- ) |
|
| F 95 (2019- ) |
|
Additional Notes
- The Valtra (Valmet) F5 Series cooling system holds 18 liters across all four variants — the F 75, F 85, F 95, and F 105 — indicating a shared cooling system architecture despite the differing power outputs across the range.
- An 18-liter coolant capacity is a moderately sized fill for agricultural tractor applications, consistent with inline multi-cylinder diesel engines of the type found in compact-to-mid-range utility tractors.
- The coolant check interval is set at 10 hours under normal use conditions, which reflects the frequency expected during active field operation where thermal stress and minor seepage can affect coolant levels relatively quickly.
- The change interval is specified at 2400 hours or 24 months under normal use conditions, whichever comes first. The dual-trigger format means calendar time governs the interval even when operating hours accumulate slowly.
- A 2400-hour or 24-month change interval is on the longer end for agricultural equipment coolant service, suggesting the use of a long-life or extended-service coolant formulation rather than a conventional short-life type.
- All four F5 Series variants introduced from 2019 onward share identical coolant capacity and service interval specifications, meaning no differentiation exists between the lower- and higher-powered models within the range for this fluid system.