Valtra (Valmet) C series

Differential fluid capacity & service interval

Valtra (Valmet) C series differential fluid capacity is 8 liters. Service intervals include checking every 500 hours and changing every 1000 hours or 12 months. The data covers 7 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • C100 (2004-2006)
  • Front
  • Use: Normal
  • Capacity 8 liter
  • Check 500 hours
  • Change 1000 hours/ 12 months
  • C110 (2004-2006)
  • Front
  • Use: Normal
  • Capacity 8 liter
  • Check 500 hours
  • Change 1000 hours/ 12 months
  • C120 (2004-2006)
  • Front
  • Use: Normal
  • Capacity 8 liter
  • Check 500 hours
  • Change 1000 hours/ 12 months
  • C120e (EcoPower) (2004-2006)
  • Front
  • Use: Normal
  • Capacity 8 liter
  • Check 500 hours
  • Change 1000 hours/ 12 months
  • C130 (2004-2006)
  • Front
  • Use: Normal
  • Capacity 8 liter
  • Check 500 hours
  • Change 1000 hours/ 12 months
  • C150 (2004-2006)
  • Front
  • Use: Normal
  • Capacity 8 liter
  • Check 500 hours
  • Change 1000 hours/ 12 months
  • C90 (2004-2006)
  • Front
  • Use: Normal
  • Capacity 8 liter
  • Check 500 hours
  • Change 1000 hours/ 12 months

Additional Notes

  • All seven Valtra (Valmet) C series variants covered in the 2004-2006 range share an identical front differential fluid capacity of 8 liters, indicating a common front axle assembly across the lineup regardless of power rating.
  • The 8-liter capacity figure represents a service fill volume, which is the amount of fluid required during a routine drain-and-refill procedure rather than a full overhaul or housing replacement.
  • A check interval of 500 hours applies uniformly across all C series variants, meaning fluid level and condition are to be inspected at that point without necessarily performing a full drain.
  • The change interval is set at 1000 hours or 12 months, whichever comes first, combining an operational hour threshold with a calendar-based limit to account for varying levels of machine use throughout the year.
  • The dual-condition change interval of 1000 hours and 12 months reflects normal use classification, meaning the specifications do not account for accelerated degradation under severe operating conditions such as heavy loads, extreme temperatures, or frequent water crossings.
  • The C120e (EcoPower) variant carries the same 8-liter front differential capacity and identical service intervals as the standard C120, indicating the EcoPower designation affects engine or drivetrain efficiency characteristics rather than the front axle assembly dimensions.
  • The consistency of the 8-liter front differential capacity across models ranging from the C90 to the C150 suggests the front axle housing was not scaled in proportion to the engine output differences between the lower and higher variants in the C series.

Other Systems