Valtra (Valmet) C series

Brake fluid capacity & service interval

Valtra (Valmet) C series brake fluid capacity is 0,3 liter. Service intervals include checks every 12 months or 500 hours and changes every 2000 hours or 24 months. The data covers 7 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
C100 (2004-2006)
  • Use: Normal
  • Capacity 0,3 liter
  • Check 12 months/ 500 hours
  • Change 2000 hours/ 24 months
C110 (2004-2006)
  • Use: Normal
  • Capacity 0,3 liter
  • Check 12 months/ 500 hours
  • Change 2000 hours/ 24 months
C120 (2004-2006)
  • Use: Normal
  • Capacity 0,3 liter
  • Check 12 months/ 500 hours
  • Change 2000 hours/ 24 months
C120e (EcoPower) (2004-2006)
  • Use: Normal
  • Capacity 0,3 liter
  • Check 12 months/ 500 hours
  • Change 2000 hours/ 24 months
C130 (2004-2006)
  • Use: Normal
  • Capacity 0,3 liter
  • Check 12 months/ 500 hours
  • Change 2000 hours/ 24 months
C150 (2004-2006)
  • Use: Normal
  • Capacity 0,3 liter
  • Check 12 months/ 500 hours
  • Change 2000 hours/ 24 months
C90 (2004-2006)
  • Use: Normal
  • Capacity 0,3 liter
  • Check 12 months/ 500 hours
  • Change 2000 hours/ 24 months

Additional Notes

  • The Valtra (Valmet) C series hydraulic brake system holds 0.3 liter of brake fluid across all seven variants — the C90, C100, C110, C120, C120e (EcoPower), C130, and C150 — for the 2004-2006 model years.
  • A 0.3 liter capacity is a relatively small volume, consistent with a compact hydraulic brake circuit rather than a combined hydraulic system that also serves implements or transmission functions.
  • The check interval for the hydraulic brake system is set at whichever threshold arrives first: 12 months or 500 hours of operation. In agricultural equipment, dual time-and-hour intervals account for machines that may sit idle for extended periods as well as those used intensively.
  • The fluid change interval is specified at 2000 hours or 24 months, again on a whichever-comes-first basis. At typical agricultural workloads, 2000 hours can represent several seasons of use, making the 24-month calendar limit the more likely trigger for lower-utilization machines.
  • The ratio between the check interval (500 hours) and the change interval (2000 hours) means the hydraulic brake fluid is inspected at least three times between each scheduled replacement, allowing condition monitoring without premature fluid changes.
  • All specifications apply under normal use conditions. The uniform capacity and interval figures across the C90 through C150 range indicate a shared hydraulic brake circuit design regardless of power output differences among the variants.

Other Systems