Valtra (Valmet) A2 Series

Brake fluid capacity & service interval

Valtra (Valmet) A2 Series brake fluid capacity is 0,3 liter. Service intervals include checking every 10 hours and changing every 2000 hours or 24 months. The data covers 3 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
A72n/A72L (2009-2014)
  • Use: Normal
  • Capacity 0,3 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
A82n/A82L (2009-2014)
  • Use: Normal
  • Capacity 0,3 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
A92n/A92L (2009-2014)
  • Use: Normal
  • Capacity 0,3 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months

Additional Notes

  • The Valtra (Valmet) A2 Series hydraulic brake system holds 0.3 liter across the A72n/A72L, A82n/A82L, and A92n/A92L configurations, a figure consistent with a reservoir service fill rather than a full system overhaul volume.
  • A check interval of 10 hours applies to the hydraulic brake system on all three configurations, reflecting the short-cycle inspection demands typical of agricultural equipment operating in demanding field conditions.
  • The brake fluid change interval is set at 2000 hours or 24 months, whichever comes first, meaning calendar time can trigger a change even when operational hours remain low.
  • The 24-month time-based threshold on the A72n/A72L, A82n/A82L, and A92n/A92L aligns with the known tendency of brake fluid to absorb moisture over time, which degrades its boiling point regardless of usage hours accumulated.
  • All three configurations share identical capacity, check, and change specifications across the 2009-2014 model year span, indicating no variation was introduced between the A72, A82, and A92 variants within the hydraulic brake system for that period.

Other Systems