Valpadana Victor

Coolant capacity & service interval

Valpadana Victor coolant capacity is 10 liters. Service intervals are 1000 hours or 12 months. Data covers 6 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Victor 55 (2555) (2001-2005)
  • Use: Normal
  • Capacity 10 liter
  • Change 1000 hours/ 12 months
Victor 65 (2565) (2001-2005)
  • Use: Normal
  • Capacity 10 liter
  • Change 1000 hours/ 12 months
Victor 75 (2575) (2001-2005)
  • Use: Normal
  • Capacity 10 liter
  • Change 1000 hours/ 12 months
Victor 50 (1999-2005)
  • Use: Normal
  • Capacity 10 liter
  • Change 1000 hours/ 12 months
Victor 60 (1999-2005)
  • Use: Normal
  • Capacity 10 liter
  • Change 1000 hours/ 12 months
Victor 70 (1999-2005)
  • Use: Normal
  • Capacity 10 liter
  • Change 1000 hours/ 12 months

Additional Notes

  • The Valpadana Victor cooling system capacity is 10 liters across all six variants covered by the specifications, spanning the Victor 50, 55 (2555), 60, 65 (2565), 70, and 75 (2575).
  • A 10-liter cooling system capacity is consistent with mid-range agricultural tractor engines, where the volume supports adequate thermal regulation under sustained field load conditions.
  • The coolant change interval for all listed variants is 1,000 hours or 12 months under normal use conditions, whichever comes first. The dual-trigger format means calendar time alone can prompt a change even when hour accumulation is low.
  • The Victor 50, 60, and 70 variants share a production window of 1999-2005, while the Victor 55 (2555), 65 (2565), and 75 (2575) carry a narrower window of 2001-2005, indicating a later introduction for the latter group within the same model family.
  • Despite the difference in introduction years between the two sub-groups, the cooling system capacity and change interval specifications are identical across all six variants, with no differentiation by power rating or model designation.
  • The parenthetical designations on the 55, 65, and 75 variants, shown as 2555, 2565, and 2575 respectively, represent alternate model codes used alongside the primary Victor naming convention in the specifications.

Other Systems