Valtra (Valmet) 04 Series
Coolant capacity & service interval
The Valtra 04 Series coolant specifications cover a coolant fluid type with a capacity of 10 liters. The data includes 5 different configurations of the model.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| 504, D27B (1982-1985) |
|
| 604, D33C (1982-1985) |
|
| 604-4, D33C (1982-1985) |
|
| 604T, TD33C (1982-1985) |
|
| 604T-4, TD33C (1982-1985) |
|
Additional Notes
- Across all five configurations of the Valtra (Valmet) 04 Series covered for 1982-1985, the cooling system capacity is uniformly rated at 10 liters.
- The 10-liter figure represents the total cooling system fill volume, which typically accounts for the engine block, cylinder head passages, radiator, and connecting hoses taken together.
- The 504 variant pairs with the D27B engine, while the 604, 604-4, 604T, and 604T-4 variants all use variants of the D33C engine family, yet all share the same 10-liter cooling system capacity.
- The 604T and 604T-4 use the turbocharged TD33C engine rather than the naturally aspirated D33C, and despite the added thermal load a turbocharger typically introduces, the cooling system capacity remains at 10 liters, identical to the non-turbocharged configurations.
- The 604-4 and 604T-4 designations indicate four-wheel-drive variants, and neither carries a different cooling system capacity from their two-wheel-drive counterparts, holding at 10 liters across both drivetrain configurations.
- All five configurations carry a normal use condition designation, meaning the 10-liter capacity figure applies to standard operating conditions rather than a severe-duty or first-change scenario.