Valpadana Victor

Brake fluid capacity & service interval

Valpadana Victor uses brake fluid with a capacity of 0,5 liter. Service intervals occur every 1000 hours or 12 months. The data covers 6 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Victor 55 (2555) (2001-2005)
  • Use: Normal
  • Capacity 0,5 liter
  • Change 1000 hours/ 12 months
Victor 65 (2565) (2001-2005)
  • Use: Normal
  • Capacity 0,5 liter
  • Change 1000 hours/ 12 months
Victor 75 (2575) (2001-2005)
  • Use: Normal
  • Capacity 0,5 liter
  • Change 1000 hours/ 12 months
Victor 50 (1999-2005)
  • Use: Normal
  • Capacity 0,5 liter
  • Change 1000 hours/ 12 months
Victor 60 (1999-2005)
  • Use: Normal
  • Capacity 0,5 liter
  • Change 1000 hours/ 12 months
Victor 70 (1999-2005)
  • Use: Normal
  • Capacity 0,5 liter
  • Change 1000 hours/ 12 months

Additional Notes

  • The Valpadana Victor hydraulic brake system holds 0.5 liter across all six configurations covered by these specifications, spanning the Victor 50, 55, 60, 65, 70, and 75 variants.
  • A 0.5 liter capacity is a relatively modest volume, consistent with the compact hydraulic brake circuits found on agricultural tractors in this power class, where the system serves braking functions rather than a combined hydraulic transmission circuit.
  • The change interval is specified as 1000 hours or 12 months under normal use conditions, meaning whichever threshold is reached first triggers a fluid change. The dual-trigger format is standard practice for equipment that may accumulate operating hours at varying rates across different seasons or workloads.
  • The 12-month calendar interval reflects the hygroscopic nature of brake fluid, which absorbs moisture from the atmosphere over time regardless of operating hours. Moisture absorption lowers the fluid's boiling point and can promote internal corrosion.
  • The Victor 50, 60, and 70 variants share a production window of 1999-2005, while the Victor 55 (2555), 65 (2565), and 75 (2575) carry a narrower window of 2001-2005, indicating a later introduction for the mid-series configurations bearing the 25xx designation.
  • The 25xx designation appearing alongside the Victor 55, 65, and 75 model names represents an alternative or internal model numbering convention, with both identifiers referring to the same physical configuration according to these specifications.
  • All six configurations share identical brake fluid capacity and change interval values, indicating a uniform hydraulic brake system design across the Victor range despite the differences in model designation and production start years.

Other Systems