Steyr 9000 MT
Brake fluid capacity & service interval
The Steyr 9000 MT uses brake fluid with a capacity of 0.4 liter. The data covers 3 configurations of this model.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| 9085 MT (2008- ) |
|
| 9095 MT (2008- ) |
|
| 9105 MT (2008- ) |
|
Additional Notes
- The Steyr 9000 MT series covers the 9085 MT, 9095 MT, and 9105 MT variants, all sharing an identical hydraulic brake system fluid capacity of 0.4 liter under normal use conditions.
- A 0.4 liter capacity is a relatively modest figure, consistent with the reservoir volume of a hydraulic brake system rather than a full circuit overhaul fill, meaning the specified amount reflects the fluid held in the master cylinder reservoir.
- All three variants — the 9085 MT, 9095 MT, and 9105 MT — carry the same 0.4 liter specification, indicating no variation in brake fluid capacity across the different power outputs within the 9000 MT range starting from 2008.
- The normal use condition tied to the 0.4 liter capacity applies uniformly across all three listed configurations, with no separate severe-use or first-change-only interval specified for any of them.