Steyr 9100

Coolant capacity & service interval

Steyr 9100 coolant capacity ranges from 21 to 29,7 liters. Service intervals include checking every 10 hours and changing every 1000 hours or 24 months. The data covers 7 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
9105a (1995- )
  • Use: Normal
  • Capacity 21 liter
  • Check 10 hours
  • Change 1000 hours/ 24 months
9115a (1995- )
  • Use: Normal
  • Capacity 25 liter
  • Check 10 hours
  • Change 1000 hours/ 24 months
9125a (1995- )
  • Use: Normal
  • Capacity 25 liter
  • Check 10 hours
  • Change 1000 hours/ 24 months
9145a (1995- )
  • Use: Normal
  • Capacity 25 liter
  • Check 10 hours
  • Change 1000 hours/ 24 months
9155a Turbo (1994- )
  • Use: Normal
  • Capacity 27 liter
  • Check 10 hours
  • Change 1000 hours/ 24 months
9170a Turbo (1994- )
  • Use: Normal
  • Capacity 27 liter
  • Check 10 hours
  • Change 1000 hours/ 24 months
9190a Turbo (1994- )
  • Use: Normal
  • Capacity 29,7 liter
  • Check 10 hours
  • Change 1000 hours/ 24 months

Additional Notes

  • Across all Steyr 9100 series variants, cooling system capacities range from 21 liters on the lower-powered 9105a up to 29.7 liters on the 9190a Turbo, reflecting the greater thermal load management requirements of larger displacement and turbocharged engines.
  • The 9105a carries the smallest cooling system capacity in the lineup at 21 liters, which corresponds to its position as the lowest-output variant among the configurations listed.
  • The 9115a, 9125a, and 9145a share an identical cooling system capacity of 25 liters despite representing different power outputs, indicating a common cooling architecture across that portion of the range.
  • The turbocharged 9155a Turbo and 9170a Turbo both specify a 27-liter cooling system capacity, a step up from the 25-liter figure shared by the naturally aspirated mid-range variants.
  • The 9190a Turbo holds the highest cooling system capacity at 29.7 liters, a fractional figure that suggests a precisely engineered system volume rather than a rounded specification.
  • All seven variants share the same check interval of every 10 hours of operation under normal use conditions, a relatively short interval consistent with the demands of agricultural machinery operating in variable field environments.
  • The coolant change interval is uniform across all variants at 1,000 hours or 24 months under normal use conditions, whichever comes first. The dual-trigger structure means calendar time can mandate a change even when hour accumulation is low, as on seasonally used equipment.
  • The 9155a Turbo and 9170a Turbo configurations carry a starting year of 1994, while the 9105a, 9115a, 9125a, and 9145a are listed from 1995, placing the turbocharged variants as the earlier introductions within the 9100 series.

Other Systems