Steyr 9000

Manual transmission fluid capacity & service interval

Steyr 9000 manual transmission fluid has a capacity range of 31 to 34 liters. Service intervals include checking every 12 months or 500 hours and changing every 1000 hours or 24 months. The data covers 7 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
M9078, M9078a Turbo (1994-2000)
  • Use: Normal
  • Capacity 31 liter
  • Check 12 months/ 500 hours
  • Change 1000 hours/ 24 months
  • Code: 32/32
M9083a Turbo (1994-2000)
  • Use: Normal
  • Capacity 34 liter
  • Check 12 months/ 500 hours
  • Change 1000 hours/ 24 months
  • Code: 32/32
M9086a Turbo (1994-2000)
  • Use: Normal
  • Capacity 34 liter
  • Check 12 months/ 500 hours
  • Change 1000 hours/ 24 months
  • Code: 32/32
M9094a Turbo (1994-2000)
  • Use: Normal
  • Capacity 34 liter
  • Check 12 months/ 500 hours
  • Change 1000 hours/ 24 months
  • Code: 32/32
9078, 9078a Turbo (1992-1997)
  • Use: Normal
  • Capacity 31 liter
  • Check 12 months/ 500 hours
  • Change 1000 hours/ 24 months
  • Code: 32/32
9086, 9086a Turbo (1992-1997)
  • Use: Normal
  • Capacity 32 liter
  • Check 12 months/ 500 hours
  • Change 1000 hours/ 24 months
  • Code: 32/32
9094a Turbo (1992-1997)
  • Use: Normal
  • Capacity 34 liter
  • Check 12 months/ 500 hours
  • Change 1000 hours/ 24 months
  • Code: 32/32

Additional Notes

  • The Steyr 9000 series uses a transaxle configuration for its manual transmission, meaning the gearbox and drive axle are housed as a single integrated unit. Fluid capacities across the lineup range from 31 to 34 liters, figures consistent with large agricultural tractor transaxles rather than passenger vehicle transmissions.
  • The 9078 and 9078a Turbo (1992-1997) carry a transaxle fluid capacity of 31 liters, the same figure shared by the M9078 and M9078a Turbo variants produced from 1994-2000. The matching capacity across both generations reflects a shared or closely related transaxle assembly between the two production runs.
  • The 9086 and 9086a Turbo (1992-1997) specify a 32-liter transaxle capacity, placing them between the 31-liter 9078-series and the 34-liter 9094a Turbo within the original 1992-1997 lineup. This incremental difference indicates a physically larger or differently configured transaxle housing compared to the 9078 variants.
  • The 9094a Turbo (1992-1997) holds 34 liters of transaxle fluid, the largest capacity in the original series. The M9083a Turbo, M9086a Turbo, and M9094a Turbo (all 1994-2000) also share the 34-liter specification, indicating that the M-series adopted the larger transaxle design across a broader range of models than the earlier generation.
  • All configurations across both the 1992-1997 and 1994-2000 production ranges share identical service intervals: a fluid level check every 12 months or 500 operating hours, and a full fluid change every 1,000 hours or 24 months. The dual-trigger format means whichever threshold is reached first governs the service event.
  • The 500-hour check interval and 1,000-hour change interval are expressed under normal use conditions. In agricultural equipment, operating hours accumulate rapidly during seasonal fieldwork, so the hourly thresholds often govern service timing more directly than the calendar-based intervals.
  • The M-series variants (1994-2000) retain the same check and change intervals as the earlier 9000-series models despite representing a separate and later production range. The 31-liter capacity of the M9078 and M9078a Turbo and the 34-liter capacity of the M9083a, M9086a, and M9094a Turbo align with the pattern established in the 1992-1997 configurations.

Other Systems