Same Virtus

Brake fluid capacity & service interval

Same Virtus uses brake fluid with a capacity of 1 liter. Service intervals require a check every 50 hours. The data covers 4 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Virtus 100 (2015-2018)
  • Use: Normal
  • Capacity 1 liter
  • Check 50 hours
Virtus 110 (2015-2018)
  • Use: Normal
  • Capacity 1 liter
  • Check 50 hours
Virtus 120, ->ZKDAZ902W0TS20001 (2015-2018)
  • Use: Normal
  • Capacity 1 liter
  • Check 50 hours
Virtus 130 (2015-2018)
  • Use: Normal
  • Capacity 1 liter
  • Check 50 hours

Additional Notes

  • The Same Virtus brake fluid specifications cover the hydraulic brake/clutch system, meaning a single fluid reservoir serves both the braking and clutch actuation circuits in each of the four variants: the Virtus 100, 110, 120, and 130.
  • All four variants share a 1-liter capacity for the hydraulic brake/clutch system across the 2015-2018 model years, indicating a uniform reservoir size regardless of engine output designation.
  • The check interval is set at 50 hours under normal use conditions for every listed variant, a figure expressed in operating hours rather than distance, which is standard practice for agricultural and utility machinery where annual mileage is not a reliable service measure.
  • The Virtus 120 carries a VIN-based production boundary, applying to units up to and including chassis number ZKDAZ902W0TS20001, which means the 1-liter capacity and 50-hour check interval are specific to that pre-cutoff production range within the 2015-2018 span.
  • No variation in fluid capacity or service interval exists between the Virtus 100, 110, 130, and the pre-cutoff Virtus 120, placing all four on an identical brake fluid maintenance schedule under normal operating conditions.

Other Systems