Same Virtus J

Brake fluid capacity & service interval

Same Virtus J requires 1 liter of brake fluid. Service intervals occur every 50 hours. The data covers 6 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Virtus J 100, ->ZKDY370200TS10001 (2015-2018)
  • Use: Normal
  • Capacity 1 liter
  • Check 50 hours
Virtus J 100, ->ZKDY450200TS10001 (2015-2018)
  • Use: Normal
  • Capacity 1 liter
  • Check 50 hours
Virtus J 110, ->ZKDY410200TS10001 (2015-2018)
  • Use: Normal
  • Capacity 1 liter
  • Check 50 hours
Virtus J 110, ->ZKDY490200TS10001 (2015-2018)
  • Use: Normal
  • Capacity 1 liter
  • Check 50 hours
Virtus J 120, ->ZKDY530200TS10001 (2015-2018)
  • Use: Normal
  • Capacity 1 liter
  • Check 50 hours
Virtus J 90, ->ZKDY330200TS10001 (2015-2018)
  • Use: Normal
  • Capacity 1 liter
  • Check 50 hours

Additional Notes

  • The Same Virtus J hydraulic brake and clutch system shares a combined fluid circuit, meaning a single reservoir and fluid volume serves both the braking and clutch actuation functions simultaneously.
  • A 1-liter capacity is specified across all Virtus J variants — the J 90, J 100, J 110, and J 120 — indicating a service fill volume rather than a full system overhaul quantity, which would typically be higher to account for line purging and component replacement.
  • The 50-hour check interval applies under normal use conditions across all four power variants covered by the 2015-2018 specifications, reflecting a time-based service schedule rather than a distance-based one, which is standard practice for agricultural and construction machinery.
  • The consistent 1-liter capacity and 50-hour check interval across the J 90, J 100, J 110, and J 120 variants suggests a shared hydraulic brake and clutch architecture regardless of engine output rating within the Virtus J range.
  • Each variant is identified by a specific serial number ceiling in the format ZKDY[number]200TS10001, which defines the upper production boundary for which each row's specifications apply within the 2015-2018 model years.
  • The J 100 variant has two separate serial number range entries — one ending at ZKDY370200TS10001 and another at ZKDY450200TS10001 — both sharing identical brake fluid capacity and check interval specifications, indicating a production split within the same model designation.
  • The J 110 variant similarly carries two distinct serial number ceiling entries, ZKDY410200TS10001 and ZKDY490200TS10001, again with no variation in the 1-liter capacity or 50-hour check interval between the two production groups.

Other Systems