Same Virtus J

Coolant capacity & service interval

Same Virtus J requires coolant with a capacity of 11 liters. Service intervals include checks at 10 hours and changes at 2000 hours or 24 months. The data covers 6 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Virtus J 100, ->ZKDY370200TS10001 (2015-2018)
  • Use: Normal
  • Capacity 11 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
Virtus J 100, ->ZKDY450200TS10001 (2015-2018)
  • Use: Normal
  • Capacity 11 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
Virtus J 110, ->ZKDY410200TS10001 (2015-2018)
  • Use: Normal
  • Capacity 11 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
Virtus J 110, ->ZKDY490200TS10001 (2015-2018)
  • Use: Normal
  • Capacity 11 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
Virtus J 120, ->ZKDY530200TS10001 (2015-2018)
  • Use: Normal
  • Capacity 11 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
Virtus J 90, ->ZKDY330200TS10001 (2015-2018)
  • Use: Normal
  • Capacity 11 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months

Additional Notes

  • The Same Virtus J cooling system capacity is 11 liters across all variants covered by the 2015-2018 specifications, including the J 90, J 100, J 110, and J 120 configurations. A uniform capacity across multiple power variants typically reflects a shared engine block or cooling circuit architecture rather than variant-specific sizing.
  • The 11-liter figure represents a service fill capacity for the cooling system, meaning the volume of coolant required to refill the circuit under normal service conditions. Overhaul or full drain figures can differ due to residual fluid retained in the block, heater core, and hoses, though only the 11-liter value appears in these specifications.
  • Coolant checks are specified at every 10 hours of operation under normal use conditions. A 10-hour check interval is characteristic of agricultural or construction equipment, where extended daily working hours and high thermal loads make frequent fluid monitoring standard practice.
  • The coolant change interval is set at 2000 hours or 24 months, whichever comes first, under normal use conditions. The dual-trigger format means a machine used lightly enough to reach 24 months before 2000 hours still requires a change at the calendar limit, and vice versa for high-utilization machines.
  • All six serial number ranges listed for the 2015-2018 model years share identical coolant capacity and service interval values. The serial number prefixes, such as ZKDY330200TS10001 for the J 90 and ZKDY530200TS10001 for the J 120, serve as production boundary markers rather than indicators of differing fluid specifications.

Other Systems