Same Rubin

Differential fluid capacity & service interval

Same Rubin differential fluid capacity is 13 liters. Service intervals include checking every 150 hours and changing every 1200 hours or 12 months. The data covers 6 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • Rubin 120 (1999-2004)
  • Front
  • Use: Normal
  • Capacity 13 liter
  • Check 150 hours
  • Change 1200 hours/ 12 months
  • Code: (4x4)
  • Rubin 135 (1999-2004)
  • Front
  • Use: Normal
  • Capacity 13 liter
  • Check 150 hours
  • Change 1200 hours/ 12 months
  • Code: (4x4)
  • Rubin 150 (1999-2004)
  • Front
  • Use: Normal
  • Capacity 13 liter
  • Check 150 hours
  • Change 1200 hours/ 12 months
  • Code: (4x4)
  • Rubin 160 (1999-2004)
  • Front
  • Use: Normal
  • Capacity 13 liter
  • Check 150 hours
  • Change 1200 hours/ 12 months
  • Code: (4x4)
  • Rubin 180 (1999-2004)
  • Front
  • Use: Normal
  • Capacity 13 liter
  • Check 150 hours
  • Change 1200 hours/ 12 months
  • Code: (4x4)
  • Rubin 200 (1999-2004)
  • Front
  • Use: Normal
  • Capacity 13 liter
  • Check 150 hours
  • Change 1200 hours/ 12 months
  • Code: (4x4)

Additional Notes

  • The front differential fluid capacity across all Same Rubin variants from 1999-2004 is 13 liters, a figure consistent with the large-scale front axle assemblies found on agricultural tractors in this power class.
  • The 13-liter capacity applies uniformly to the Rubin 120, 135, 150, 160, 180, and 200 across the full 1999-2004 production span, indicating a shared front differential housing design regardless of engine output rating.
  • The check interval is set at 150 hours under normal use conditions, a relatively short inspection cycle that reflects the mechanical stress placed on front differential assemblies in field operation.
  • The fluid change interval of 1200 hours or 12 months, whichever comes first, combines an hour-based threshold with a calendar-based limit. The annual calendar cap ensures fluid degradation from moisture ingress or thermal cycling is addressed even in low-hours seasonal operation.
  • All six Rubin configurations share identical check and change intervals under normal use, meaning the interval specifications are not differentiated by the power output differences between the 120 and 200 variants.

Other Systems