Same Laser 3

Coolant capacity & service interval

Same Laser 3 coolant capacity is 16 liters. Service intervals include checks at 10 hours and changes at 1200 hours or 24 months. The data covers 2 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Laser 3 140 (2010-2013)
  • Use: Normal
  • Capacity 16 liter
  • Check 10 hours
  • Change 1200 hours/ 24 months
Laser 3 160 (2010-2013)
  • Use: Normal
  • Capacity 16 liter
  • Check 10 hours
  • Change 1200 hours/ 24 months

Additional Notes

  • The Same Laser 3 140 and Laser 3 160 both carry a cooling system capacity of 16 liters, a figure consistent with a full service fill across the entire cooling circuit rather than a partial top-up volume.
  • A check interval of 10 hours applies to the cooling system on both configurations, reflecting the relatively short operational cycles typical of agricultural machinery where thermal stress and contamination can accumulate quickly.
  • The coolant change interval is set at 1,200 hours or 24 months under normal use conditions, whichever comes first, meaning time elapsed can trigger a change even when the hour threshold has not been reached.
  • The 140 and 160 variants share identical cooling system specifications across capacity, check frequency, and change interval, indicating no differentiation in cooling system servicing requirements between the two engine outputs for the 2010-2013 period.

Other Systems