Same Rubin
Brake fluid capacity & service interval
Same Rubin uses brake fluid with a capacity of 0,8 liter. Service intervals include 300 hours or 24 months. The data covers 6 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Rubin 120 (1999-2004) |
|
| Rubin 135 (1999-2004) |
|
| Rubin 150 (1999-2004) |
|
| Rubin 160 (1999-2004) |
|
| Rubin 180 (1999-2004) |
|
| Rubin 200 (1999-2004) |
|
Additional Notes
- The Same Rubin 120, 135, 150, 160, 180, and 200 all share an identical hydraulic brake and clutch system fluid capacity of 0.8 liter across the full 1999-2004 model range.
- A shared hydraulic circuit for both braking and clutch actuation is a common arrangement in agricultural tractors, where a single fluid reservoir serves both functions simultaneously.
- The 0.8 liter capacity figure represents a service fill volume, reflecting the amount of fluid held within the combined hydraulic brake and clutch circuit rather than a full system overhaul quantity.
- Fluid checks are specified at 300-hour intervals under normal use conditions, a schedule tied to operating hours rather than calendar time, which is standard practice for agricultural machinery subject to variable annual usage.
- The change interval of 24 months applies regardless of accumulated operating hours, meaning the calendar-based interval governs replacement even when the 300-hour check threshold has not been reached.
- Brake fluid is hygroscopic, meaning it absorbs moisture from the atmosphere over time, which is the primary reason a time-based change interval of 24 months exists alongside the hour-based check schedule.
- The uniform specifications across all six Rubin variants from the 120 to the 200 indicate a common hydraulic brake and clutch system architecture shared throughout the lineup during the 1999-2004 period.