Same Frutteto CVT

Differential fluid capacity & service interval

Same Frutteto CVT uses differential fluid with a capacity of 6 liters. Service intervals include checking every 300 hours and changing every 1200 hours or 12 months. The data covers 10 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • Frutteto CVT 100, Stage 5->ZKDHF90200TS50001 (2020- )
  • Front
  • Use: Normal
  • Capacity 6 liter
  • Check 300 hours
  • Change 1200 hours/ 12 months
  • Frutteto CVT 100, Stage 5->ZKDHW002W0TS50001 (2020- )
  • Front
  • Use: Normal
  • Capacity 6 liter
  • Check 300 hours
  • Change 1200 hours/ 12 months
  • Frutteto CVT 105, Stage 5->ZKDHG10200TS50001 (2020- )
  • Front
  • Use: Normal
  • Capacity 6 liter
  • Check 300 hours
  • Change 1200 hours/ 12 months
  • Frutteto CVT 105, Stage 5->ZKDLZ902W0TS50001 (2020- )
  • Front
  • Use: Normal
  • Capacity 6 liter
  • Check 300 hours
  • Change 1200 hours/ 12 months
  • Frutteto CVT 115, Stage 5->ZKDHG10200TS50001 (2020- )
  • Front
  • Use: Normal
  • Capacity 6 liter
  • Check 300 hours
  • Change 1200 hours/ 12 months
  • Frutteto CVT 115, Stage 5->ZKDHW402W0TS50001 (2020- )
  • Front
  • Use: Normal
  • Capacity 6 liter
  • Check 300 hours
  • Change 1200 hours/ 12 months
  • Frutteto CVT 90, Stage 5->ZKDHF80200TS50001 (2020- )
  • Front
  • Use: Normal
  • Capacity 6 liter
  • Check 300 hours
  • Change 1200 hours/ 12 months
  • Frutteto CVT 90, Stage 5->ZKDLZ102W0TS50001 (2020- )
  • Front
  • Use: Normal
  • Capacity 6 liter
  • Check 300 hours
  • Change 1200 hours/ 12 months
  • Frutteto CVT 95, Stage 5->ZKDHG00200TS50001 (2020- )
  • Front
  • Use: Normal
  • Capacity 6 liter
  • Check 300 hours
  • Change 1200 hours/ 12 months
  • Frutteto CVT 95, Stage 5->ZKDLZ502W0TS50001 (2020- )
  • Front
  • Use: Normal
  • Capacity 6 liter
  • Check 300 hours
  • Change 1200 hours/ 12 months

Additional Notes

  • The Same Frutteto CVT front differential fluid capacity is 6 liters across all listed configurations, covering the CVT 90, CVT 95, CVT 100, CVT 105, and CVT 115 variants. A consistent capacity across power variants of this range indicates a shared front axle assembly rather than axle units scaled to output rating.
  • All ten configurations carry a Stage 5 emissions designation, with serial number breakpoints beginning from 2020. Each configuration is identified by a distinct serial number prefix, reflecting separate production or market variants within the same model family.
  • The fluid check interval is set at 300 hours under normal use conditions. In agricultural equipment, a 300-hour check interval is a relatively frequent inspection point, reflecting the demanding load cycles typical of orchard and vineyard tractors in the Frutteto segment.
  • The fluid change interval is specified at 1200 hours or 12 months, whichever comes first. The dual-trigger structure means calendar time can mandate a change before the hour threshold is reached, which is relevant for machines operating at lower annual utilization.
  • The ratio between the check interval (300 hours) and the change interval (1200 hours) means a fluid level check falls due four times for every single drain-and-fill service cycle. This staggered structure allows condition monitoring without committing to a full fluid replacement at each inspection.
  • Each of the five power variants in the lineup, CVT 90 through CVT 115, has two distinct serial number series listed. The front differential fluid specifications are identical across both series within each power variant, indicating no specification difference between the two production lines at the front axle level.

Other Systems